BSPK Receiver Tracking Example Pseudo-random binary data is generated, BPSK modulated, corrupted with noise, and then demodulated using a Phase Locked Loop
Fast Fourier Transforms The FFT block performs a one-time FFT or IFFT and is controlled by an external trigger. The output of the FFT block can be treated as a time domain signal within the simulation and manipulated as such
Frequency Response of FIR Filter This simulation illustrates the use of the FFT block to obtain the frequency respnse of an FIR filter from its impulse response
Dynamic Equalizer (16 QAM Modulation) This diagram illustrates the use of baseband equalization to compensate for channel distortions on a 16 QAM link. A modulated signal is distorted via the use of a bandlimiting Chebyshev filter with about 3 dB of ripple across the band. The effects of the filter on the modulated signal are evident by looking at the Eye Plot and Phase Scatter Plot.
Adept Scientific brings you Vissim/Embedded Controls Developer for DSPs in partnership with Kane Computing Ltd - a specialist provider of hardware and software tools for DSP development.
Call +44 (0)1606 351006 to make an enquiry about Vissim/ECD or email sales@kanecomputing.com
"Due to its power, flexibility, ease-of-use, and low cost, VisSim has been Carrier's choice for system modeling, simulation, data acquisition, and rapid prototyping for over eight years." Mr. Richard Kolk - Manager Simulation & Control Technology
"For my current project, VisSim has allowed me to collapse my firmware development time from months down to about a week. It is almost impossible to overstate the importance of VisSim to my development time-table." -Greg Gottschalk Electrical Engineer
RSS Feeds
VisSim/Real-TimePRO
Adept Scientific brings you Vissim/Embedded Controls Developer for DSPs in partnership with Kane Computing Ltd - a specialist provider of hardware and software tools for DSP development.